BEARWARE 302547 - Page 75

75English
Low baery:
If the baery symbol appears, then the inserted baeries are empty and should
be replaced with new baeries as soon as possible. This applies to the outdoor
sensor as well as to the base staon.
Outdoor temperature display:
The outdoor temperature is measured by the outdoor sensor and shown to an
accuracy of one tenth of a degree. The congured temperature unit is displayed
to the right of the reading. The temperature unit can be changed between ° C and
° F. To do this, press the °C / °F buon on the
back of the weather staon.
If the reading is less than the minimum value
(-20°C / -4°F), the display shows "LL.L". If the
value is more than the maximum value are
(50°C / 122°F), the display shows "HH.H".
Channel display
The weather staon receives the signal of the outdoor sensor
automacally aer all sengs have been congured. You can
switch between the dierent channels using the "CH" buon.
The channels of the outdoor sensor can be selected on the
device directly using a toggle switch.
1, 2, 3: Outdoor sensor channel
: Automac channel change