BEARWARE 304950 - Intended Use; Functional Overview

14 English
• Do not connect any devices whose load exceed the rated
capacity.
• Make sure that you disconnect the circuit before connecng the
device.
• The device should only be installed and connected by
qualied technicians!
3.1 Intended use
The mer is mounted on a DIN rail and is provided as a mer switch for electrical
devices with 230 V AC (alternang voltage). The mer has 20 programmable
switching mes (10 ON and 10 OFF mes).
The maximum input current of a connected device should not exceed a resisve
load of 16 A and an inducve load of 2A. The device is suitable for DIN rails only
It should only be used in dry, closed rooms. Avoid contact with moisture under all
circumstances.
Do not recongure or modify the product in any way for safety reasons. The
device may be damaged if you use the product for any other purpose than that
described above. Improper use can also result in hazards such as short circuits,
re or electric shock. Read the user manual carefully and keep it in a safe place.
Please include the user manual if you pass the product onto others.
4. Funconal overview
The mer provides the following funcons and seng opons:
• 10 ON/OFF programs
• Output LED display
• ON / AUTO /OFF funcon
• 12/24 hour display
• Summer me funcon
• 16 combinaons of days or blocks of days
The individual days of the week are shown in the mer LC display in the form
of English abbreviaons. The following table shows the abbreviaons and the
corresponding day of the week:
The above table shows an overview of the combinaons that can be selected for
the respecve days of the week.