BEARWARE 304950 - Important Tips

13English
Thank you for choosing a Bearware product. Please read the following user man-
ual carefully so as to get the most from the product you have purchased. Before
using the product, rst check that the delivered item is complete, accurate and
undamaged.
1. Scope of delivery
• DIN rail mer
• User manual
2. Technical data
3. Important ps
Do not connect any devices, where the current of 16 (2) A is exceeded. If you
need to clean the product, rst disconnect the mer completely from the mains,
remove it from the rail and wipe the device using a dry cloth. Never immerse the
mer in water or other liquids! Heaters and similar devices should never be le
unaended during operaon. The manufacturer recommends not connecng any
such devices to the mer.
• Only for use in dry interiors
• Do not insert / connect in series
• Disconnected only when the plug is removed
• Do not use with heang elements (e.g., heaters, irons, kitchen
appliances, etc.)
Input voltage 230 V AC 50 Hz
Maximum load 16 (2) A, 3680W µ
Operang temperature -10°C to +40°C
Backup baery NiMH 1.2 V (> 100 hours)
Min seng me 1 minute
Protecon class II
Protecon category IP20
Degree of soiling 2
Creep resistance PTI 175
Overvoltage category 4kV