BEAULIEU 4008 - Release Button and Cable-Release Socket; Emulsion-Speed Setting System

C Continuous action position (exceptional)
For
remote-control
filming
—
by
cable
or
radio
—
or
for
filming
oneself.
Pull
the
plunger
out
until
the
red
dot
appears.
Per-
manent
electric
contact
is
established.
Lock
the
push-button
release,
and
control
the
camera's
action
either
by
radio
or
by
means
of
the
cable
switch.
When
a
tripod
is
used
for
filming
in
position
(C)
without
a
remote-
control
device,
starting
and
stopping
must
be
controlled
with
the
push-button
release,
either
manually
or
with
a
release
cable.
E: Release button
(and cable-release socket)
This has three positions : (7)
— "Free": the film does not move.
— *"Depressed”: this position puts the film in motion.
—
*"Depressed
and
turned
90°
clockwise":
this
position
locks the release button and allows continuous filming.
The
female
thread
in
the
center
of
the
button
receives
the
cable
release.
*
Providing
the
power-supply
switch
(D)
is
in
position
(A)
or
(C).
F : Emulsion-speed setting system (8)
This
system
makes
it
possible
to
adjust
the
photocell
according
to
the
sensitivity
of
the
emulsion
used.
11