BEAULIEU 4008 - Page 44

MAINTENANCE
1° Lens
Lens surfaces must be kept extremely clean. Outside surfaces are
wiped with a fine, clean, lint-free cloth. This cloth should never be
moistened. After filming, screw in the front lens cap.
2* Film gate (19)
The gate should be cleaned frequently (every 3 or 4 films) with the
hand blower (55).
Caution \
Never slip anything (hand blower, brush or cloth) through the gate,
as this would damage the gelatin filters. To remove any possible
specks of dust, blow carefully with the hand blower.
3° Reflex system
The mirror and focussing screen can be reached through the lens
mount opening. Unscrew the lens: the mirror becomes visible. If
there are dust specks on it, remove them with the hand blower.
4 Lubrication
This should always be left to us. After three years, it is advisable
to leave the camera in the care of a Beaulieu dealer, who will
overhaul it.
44
So O O