This document outlines the features and operational guidelines for the BEAUTURAL Handheld Garment Steamer. It is designed for domestic use to remove wrinkles and creases from garments, curtains, and fabrics.
Function Description:
The BEAUTURAL Handheld Garment Steamer is a portable device used for steaming various fabrics. It operates by generating high-temperature steam to relax fabric fibers, thereby smoothing out wrinkles. The steamer is intended for use in an upright position on hanging garments, allowing for easy up and down motion over the fabric. It is also suitable for refreshing furniture upholstery, slip covers, and cushions. The device includes a steam activation button for single-time steaming and a lock button for continuous steam. An intelligent automatic power-off function ensures the device shuts off after approximately 8 minutes of inactivity, enhancing safety and energy efficiency.
Important Technical Specifications:
- Instruction Manual Dimensions: 148mm x 210mm
- Cover Material: 128g coated paper, color printed
- Inner Page Material: Writing paper, black and white printed
- Rated Voltage (US): AC 120V~ 60Hz
- Rated Power (US): 1200W
- Rated Voltage (EU): AC 220-240V~ 50/60Hz
- Rated Power (EU): 1200W
- Water Tank Capacity: 0.26 liters (8.8 fluid ounces)
- Continuous Steam Rate: 18-20ml/min (0.6-0.7oz/min)
Usage Features:
The steamer is straightforward to assemble and operate. Before first use, it is recommended to unwind and straighten the power cord, ensure proper assembly, and test the steamer on an unwanted piece of fabric to remove any production residues and odors, and to determine suitable temperatures.
To operate:
- Fill Water Tank: Press the Water Tank Release Button, pull out the water tank, open the inlet cover, and fill with tap or distilled water up to the MAXIMUM level. Ensure the tank is at least one-third full but not overfilled. Reinsert the water tank into the steamer.
- Attach Brush (Optional): Hold the steamer upright and attach either the fabric brush or lint brush to the steam head until an audible "click" confirms it's locked. The pointed side of the brush should face downward. To remove, lift the pointed tip.
- Power On: Connect the steamer to a power outlet and press the Power Button. The power indicator light will flash during heating and become solid when preheating is complete. Press the Power Button again to switch off.
- Steam Activation: Press the Steam Activation Button for a single burst of steam. To steam continuously, press the Steam Activation Button and then push down the lock button.
- Steaming Garments: Place the fabric in a dry, ventilated area, at least 20 cm (8 inches) from walls. Empty pockets and straighten turn-ups. Hang the garment and stretch it slightly with one hand. Place the fabric brush against the garment, pressing and holding the Steam Activation Button while moving your arm up and down, targeting creases. Release the button to stop. If steaming without the brush, maintain a distance of at least 5 cm (2 inches) between the steam head and the garment.
- Steaming Curtains: Wash and dry curtains, then steam them while they are hanging, stretching them with one hand to aid crease removal.
- Steaming Upholstery: Use the steamer to freshen upholstery, slip covers, and cushions. Always test on an inconspicuous area first. Move the steamer in an up and down motion over the fabric. Remove cushions and hold them upright for steaming, allowing them to dry thoroughly afterward. For delicate fabrics like silk, use the fabric brush attachment. For stubborn creases, removing the brush and continuous steaming may be more effective.
- This product is for domestic use only.
- Keep out of reach of children unless under proper supervision.
- Ensure the power source voltage matches the rating plate.
- Do not place heavy or sharp objects on the power cable.
- Position cables to avoid tripping hazards.
- Avoid plugging other appliances into the same circuit to prevent overload.
- Replace damaged power cords with a qualified technician.
- Do not expose to humidity or use outdoors.
- Only use tap or distilled water; other liquids or additives can damage the steamer.
- Never leave the steamer unattended when hot, switched on, or connected to power.
- Do not use if dropped or if there are visible signs of damage or leakage.
- The steamer has a thermal safety fuse but should not be left unattended.
- Never use on worn clothes or direct steam towards people or animals.
- Preheat the steamer for 2-3 minutes to prevent water leakage from the steam head.
- Always unplug before attaching or detaching the fabric brush.
- Only use officially provided attachments and accessories.
- Do not steam over metal accessories; use caution around them.
- Do not touch the steam head during use; ensure it faces away from you.
Maintenance Features:
- Cleaning: Always unplug the steamer before cleaning. Do not immerse in water or other liquids. Allow the steamer to cool completely before cleaning to avoid burns. Remove the fabric brush and clean it with a dampened, lint-free cloth. Do not use corrosive liquids. Do not drop, throw, bend, or attempt to open the steamer's housing.
- Storage: If not using immediately, unplug the power cord. Allow the steamer to cool completely before storing. Do not store in direct sunlight or hot places. Once cooled and disconnected, empty the water tank and wrap the power cord safely around the steamer. Store the steamer on a flat surface in an upright position.
- Troubleshooting:
- No Heat: Check power plug, power supply, and power button.
- No Steam: Check water level, ensure water tank inlet cover is closed, press Steam Activation Button harder, and hold the steamer in an upright position.
- Water Spills: Ensure water is not over the MAX level, water tank inlet cover is closed, and use the steamer in an upright position.
- Loud Humming/Pumping: Check water level; refill if low.
- Ineffective Crease Removal: Hold steamer upright and stretch fabric downward.
- When to Use Fabric Brush: Use when steaming directly touching fabric, or for delicate fabrics (like silk) to reduce water dripping.
Disposal:
The appliance should not be disposed of with normal domestic waste. It is subject to European Directive 2012/19/EU. Dispose of the appliance via an approved disposal company or municipal waste facility, observing applicable regulations. The packaging is made from environmentally friendly material and can be disposed of at a local recycling plant.
Need help?
General
To Next Page