WARRANTY
FOR VANGUARD 35
KOHLER 27 & 40
Two years: the engine manufacturer provides a warranty on the engine, as stipulated in the owners manual.
If you need service, locate an engine mfg service center in your community or contact the engine mfg for a
service center location.
Beavertail warrants that the frame and drive is free from defects in material and workmanship, assuming
normal use, for a period of one year from the date of purchase. Warranty does not cover lack of lubrication,
normal wear, collision, abuse or mistreatment, or lack of maintenance.
If a defect occurs during this period, contact your nearest dealer or Beavertail with a dated proof of
purchase. You will be directed where and when to take your equipment for inspection and or service. It is
the customers responsibility to present the equipment to the repair center for repair. Repair sequence and
completion dates are set by the service center. If frame or drive parts are required to complete authorized
warranty work, Beavertail will ship them at no charge. Expedited shipping is the responsibility of the
customer. If warranty work is denied due to lack of lubrication or maintenance, collision, abuse or
mistreatment, the customer may appeal to Beavertail for review. We will do everything reasonable to assist
the customer.
Except for the expressed warranty of Beavertail set forth above, Beavertail grants no other warranties,
expressed or implied, by statue or otherwise, regarding the Beavertail surface drive motor, its fitness for
any particular purpose, its quality, its merchantability, or otherwise. The liability of Beavertail under the
warranty set forth above shall be limited to the fair market value of the product at time of warranty claim.
In no event, shall Beavertail Manufacturing be liable for any special, consequential, or other damages for
breach of warranty. Beavertail has the right to change the product design at anytime without any obligation
under this warranty.
Your Beavertail motor is designed to last you many years with proper care and use. Warranty items are
repaired by authorized Honda, Vanguard, or Kohler engine repair centers and the drive/frame by Beavertail
service centers. You are important to us, so call whenever you have questions or need assistance. Many
owners prefer to repair their own mud motors and we will promptly send parts by regular ground when
needed .Express shipping is also available, but this expense is the responsibility of the owner.
THANK YOU FOR PURCHASING A BEAVERTAIL PRODUCT.
This owner’s manual contains the necessary information you will need to unpack, install, operate and
maintain your Beavertail backwater motor. Safety is key to operating any motorized equipment. READ
THE WARNINGS IN THIS OWNERS MANUAL, THE CAUTION LABELS ON THE ENGINE AND
ITS MANUAL BEFORE RUNNING YOUR BEAVERTAIL MOTOR.
SAFETY
-Read these safety precautions before operating your Beavertail boat and motor.
-Always attach the safety lanyard to your self while operating the Beavertail motor. Unclip the safety
lanyard from the switch or depress the red button each time you run the engine to ensure it is working
properly. The engine should stop immediately when the red button is depressed, or the safety clip is
removed from switch.
-The Beavertail boat and motor can be operated from the sitting position. If you stand, use a stand-up bar to
maintain your balance. Protect the safety of passengers.
-Always wear a coast guard approved flotation device.
-Keep body parts and clothing clear of all moving engine components, the drive shaft, and propeller.
-Do not operate your Beavertail boat or motor while others are standing near the out drive.
To Next Page
Loading...