6
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Cot...
1
2
3
Attach both End Panels to one Side Panel using
4 x 60mm bolts.
Tighten Until Firm.
Cot should now resemble photo opposite.
Carefully lay the cot down on the Side Panel.
It is advisable that two people assemble the cot in the room in which it is to be
used.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the cot is assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the cot is not scratched during assembly.
1a.
1b.
2a.
3a.
a.
b.
c.
d.
e.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
WARNING
To Next Page
Loading...
