Step : 17/54
CAUTION: before starting to fit the seat read through all the instructions provided. The carrying handle of the Creatis Fix must
always be in the upward position when it is in use as a car seat. The blue marks on the Creatis.fix indicate the path of the
safety belt.
1 - Fasten the belt and place your Creatis.fix facing backwards on the seat of the vehicle.
Step : 18/54
2’ - Thread the lap belt through the lower slot in the shell and fasten it as shown.
CAUTION: when passing the lap belt through the slot in the shell, always ensure that it is not twisted.
10 / 28
To Next Page
Loading...
