8
TIGHTENING THE HARNESS
SLACKENING THE HARNESS
Pull the shoulder straps upwards to remove the slack from
the lap sections of the harness. Now pull the adjuster strap
until the harness is fully tightened. The harness should be
adjusted as tightly as possible without causing discomfort
to your child. Straps should not be twisted. Ensure that the
lap strap portion is located as low as possible towards the
lap – not around the stomach, so that the pelvis is firmly
engaged.
A loose harness can be dangerous. Check the harness
adjustment & tighten each time the child is placed in the
The harness is slackened by pressing the
lever (under the seat cover) on the front of
the seat.
Press down on the lever (1) as you grip the
two shoulder straps with your other hand.
Pull the shoulder straps towards you to
loosen the harness (2).
Take care when adjusting the shoulder straps
that you do not trap the harness adjuster strap
as you press down on the lever.
To Next Page
Loading...