General 38
Congratulations 39
For the safety of your Child 39
Construction 42
unpack the pram and build up the chassis 42
The baby carriage 42
SPECIAL FEATURES IN THE BELLAMI, PARIS, LONDON, MYVARIO OR FLORIDA
KINDERWAGEN 42
With the Bellami pram, the myVARIO and the Florida pram, the way to build the carrycot is different.
You can see this on the left side. 42
SPecial features for Model Retro 43
The Pushchair 44
Attach the safety bar 45
Operating the footrest 45
Adjusting the seat position 45
Adapter of the car seat 46
Mount the adapters to the infant carrier. You put the baby seat up and down like the carrycot and the
sports seat. See installation and operation of the car seat / infant carrier (optional) 46
Safety Belt 46
Unlocking the swivel tires 46
Mount the rear tires 47
Remove the rear tires 47
Pack the chassis for transporting 48
Special features for Model Retro 49
Assembly and Handling of the car seat / infant carrier (sold separately) 50
1 Open the safety belt, to place the car seat 50
2 PUT THE CHILD SEAT ALONG THE DRIVING DIRECTION ON THE CAR SEAT. AND KEEP
ON STABLE HOLD. 50
3 PLUG IN THE SAFETY BELT THROUGH THE SIDE BRACKETS IN THE SAFETY BELT
TAKE OVER AND THAT THE SAFETY BELT IS NOT LOOSE 51
4 REMOVE THE SAFETY BELT FROM RECORDING BEHIND THE CAR SEAT AND MAKE 51
5 MAKE SURE THE SAFETY BELT IS CLEANED THROUGH THE BRACKET. HE MUST NOT
BE TURNED! 52
To Next Page
Loading...