SPECIALS FOR THE BELLAMI PRAM
There are two important points to keep in mind.
Point 1 is that the adapters can only be connected to the frame in one way. You can see this in the
photos below.
Point 2 is that it's making sure that the adapters are locked correctly.
The adapters are placed on the frame as shown in the pictures. You can see that the adapters
have two different sides. One side (marked with a 1 on the picture) shows the side that is later
connected to the lock. And the other side (marked with a 2 in the picture) is hooked into the hook
on the other side of the mounting rail.
The steps in short form:
1.) Mount the adapter to the baby carrier
2.) Hook the adapter in the direction of the hook (Fig. 2) and secure it with slight pressure into the
catch (Fig. 1).
3.) Finish. The baby carrier is correctly attached.
To Next Page
Loading...