ASSEMBLING THE CAR SEAT
Grasp the carrycot by the carrying handle and press in the direction of travel with the two
metal bars into the ISOFIX base devices
Here, too, a loud CLICK sound signals the correct seat. In addition, a sign changes from
red to green at the front of the ISOFIX base
For additional safety, you can also make the seat belt around the baby seat. Please pay
attention to the instructions of the infant carrier
A view from below of the metal bars that are put into the ISOFIX base.
UNPLUG THE CAR SEAT
Remove the seatbelt, if present, and put the carrying handle in an
upright position. Now press the button directly on the front of the
ISOFIX base and lift out the carrycot on the carrying handle.
The baby seat can now be easily removed from the car.
To Next Page
Loading...