Enlarging the child safety seat
Removal and maintenance of the upholstery
WARNING!
As your child grows, you are to adjust the child safety seat according to the
following steps:
1 Remove the small mattress from underneath the foam bottom that reduces the
seat size (illustration 19).
2 Remove the foam bottom (illustration 20).
3 Switch the position of the belts from position 1 to 2 (illustration 17).
• You can remove the upholstery as follows:
- First unfasten the material at the head of the child’s seat.
- Now unhook the upholstery at the height of the press buttons (illustration 18).
-Pull the upholstery upward at the foot and unfasten the material around the
button of the central adjuster.
- Slide the belt cover off the safety belts.
• You can wash the upholstery by hand at a temperature of 30°C.
• The plastic parts can be cleaned using lukewarm water and soap.
Do not use any solvents to clean the car seat.
• WARNING: Never leave the child unattended.
• WARNING: Do not use the reclined cradle once your child can sit unaided.
• WARNING: This reclined cradle is not intended for prolonged periods of
sleeping.
• WARNING: It is dangerous to use this reclined cradle on an elevated surface,
e.g. a table.
• WARNING: Always use the restraint system.
• This car seat does not replace a cot or a bed. Should your child need to sleep,
then it should be placed in a suitable cot or bed.
• Do not use the car seat if any components are broken or missing.
• Do not use accessories or replacement parts other than those approved by the
manufacturer.
• The Easymaxi is suitable for children up to a weight of 13 kg.
• The Easymaxi has a small storage compartment at the rear in which to store a
number of small items. You can also store the instructions for use in this
compartment (illustration 16).
• You can remove the child from the Easymaxi without removing the child’s seat
from the car.
• You must support the head of your newborn child with the accompanying foam
bottom that is used to reduce the size of the seat.
• Never hold your child on your lap in the car; always use the Easymaxi (this also
applies to short trips).
• Make sure that the Easymaxi has been set up in such a way that no parts can
become caught between the door or between the mechanism of the adjustable
child’s seat.
• Replace the Easymaxi following a car accident.
• The Easymaxi should always be fastened with the 3-point belt, even if your
child is not accompanying you on your trip.
• The non-upholstered, plastic parts of the child’s seat may become too warm for
contact with your child’s skin if the car has been standing in the sun for too long.
• Make sure that the belts of the Easymaxi are not twisted and that they fit snugly
around the body of your child.
• Make sure that the 3-point belt, which you have used to secure the Easymaxi in
the car, is indeed secure and drawn tight.
• Do not make any adjustments to the Easymaxi.
• Never leave your child unattended in your car.
• Be sure to secure any baggage or other objects that may cause harm during a
car accident.
• Install your Easymaxi according to the instructions.
• Always use the belt to secure your child in the child’s seat.
• Only use the original upholstery, this in connection with the safety regulations.
• The Easymaxi is completely recyclable.
ENGLISH
To Next Page
Loading...
