SETTING: WIND MONITORING, TIME END POSI‐
TION, TIME INTERM POS, TIME FABRIC TENSION/
TILT
TIME END POSITION
WIND MONITORING
1. You have confirmed the menu item WINTER OFF/ON.
WIND MONITORING appears.
2. You can adjust the wind strength using the +/- button.
3. Confirm your setting with OK. TIME END POSITION appears.
4. You can choose between TIME END POSITION, TIME INTERM
POS and TIME FABRIC TENSION/TILT using the +/- button.
Note
With this selection, you specify the position to which
the sun protection travels once the set shade time
has been reached.
5. Confirm your selection with OK.
6. The TIME END POSITION function is now set.
7. For details on further programming in the SETTING menu,
please continue reading.
56
To Next Page
