Becker Centronic SunWindControl SWC745-II User Manual

Centronic SunWindControl
SWC745-II
de Montage- und Betriebsanleitung
Sonnen-Wind-Steuergerät im Handsender mit Display
Wichtige Informationen für:
• den Monteur / • die Elektrofachkraft / • den Benutzer
Bitte entsprechend weiterleiten!
Diese Originalanleitung ist vom Benutzer aufzubewahren.
en Assembly and Operating Instructions
Sun/wind control unit in a hand-held transmitter with
display
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept safe for future reference.
fr Notice de montage et d’utilisation
Appareil de commande soleil/vent de la télécommande
avec écran
Informations importantes pour:
• l'installateur / • l'électricien / • l'utilisateur
À transmettre à la personne concernée!
L'original de cette notice doit être conservée par l'utilisateur.
nl Montage- en gebruiksaanwijzing
Zon-wind-regelapparaat in handzender met display
Belangrijke informatie voor:
• de monteur / • de elektricien / • de gebruiker
Aan de betreffende personen doorgeven!
De gebruiker dient deze originele gebruiksaanwijzing te bewaren.
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com

Becker Centronic SunWindControl SWC745-II Specifications

General

Type	Remote Control
Technology	Radio
Frequency	868 MHz
Range	Up to 100 meters
Compatibility	Becker Centronic devices

Summary

Safety Instructions and Precautions

Intended Use and Limitations

Operating the Remote Control

Programming Functions

Program Menu Overview

Guide to accessing and using the PROGRAM menu.

AUTO Shade Time Configuration

Preventing premature extension or late retraction with AUTO shade time.

Shade Time Configuration

Setting programmable extend/retract times for sun protection.

Settings and Configuration

Settings Menu Options

Overview of available settings: SUN, DELAY, WINTER, WIND MONITORING.

Delay Time Settings

Configuring delay times for sun threshold exceedance and brightness fall.

Sun Threshold Value Setting

Adjusting sun threshold for automatic sun protection.

Position and Tension Settings

Winter Mode and Wind Monitoring

Programming the Remote Control

Master Transmitter Programming

Steps to prepare the receiver and program the master transmitter.

Setting Time and Date

Configuring Shade Time Programs

Setting specific shade times or automatic shade times for operations.

Setting Sun and Delay Parameters

Adjusting sun threshold values and delay times.

Setting Positions and Winter Mode

Setting Wind Monitoring and Time-Based Positions

Setting Sun-Based Positions

Function Settings: Awning/Blind and Running Time

Additional Transmitter Programming

Maintenance and Battery Replacement

Installation and Maintenance

Troubleshooting Common Issues