Need help?Do you have a question about the BECKWITH ELECTRIC M-2001 Series and is the answer not in the manual?
Details the standard capabilities and characteristics of the adapter panel, including voltage sensing and surge protection.
Step-by-step instructions for safely removing the existing Toshiba regulator from its cabinet.
Guidance on mounting the M-2001 Series Digital Tapchanger Control onto the M-2299 adapter panel.
Procedures for physically installing the M-2299 adapter panel into the regulator control cabinet.
Information on how the adapter panel is protected against transient voltage surges and system transients.
Outlines primary features like neutral light, auto disable input, and local/remote operation.
Illustrates typical wiring configurations for connecting the M-2299 to Toshiba regulators.
Explains the interconnection and use of the M-0329 LTC Backup Control with the tapchanger control.
Instructions for configuring M-2001 software parameters like Bandcenter, Bandwidth, and LDC.
Guidance on setting the Block Raise and Block Lower limits for the M-0329 backup control.
Lists the necessary equipment for performing tests on the M-2299 adapter panel and M-2001 control.
Outlines the initial steps and connections required before commencing testing procedures.
Specifies the default or recommended initial settings for various test parameters.
Detailed step-by-step instructions for conducting bench tests to verify functionality.
Procedures for checking out the M-2001 Tapchanger Control after installation.
Guidelines for performing tests on the unit while it is in operational service.
Steps to verify power supply, fuses, and connections during the checkout process.
How to test the voltage source switch and its functional impact on the control system.
Recommendations and procedures for the proper maintenance of the adapter panel.
General| Brand | BECKWITH ELECTRIC |
|---|---|
| Model | M-2001 Series |
| Category | Adapter |
| Language | English |
To Next Page