Bedford HMR Solutions - User Manual

ASSEMBLY GUIDE
HMR Solutions
2 Door Split Cabinet 600mm
IMPORTANT
Before commencing Assembly:
• Read all instructions COMPLETELY.
• Hardware kit contains small parts; keep out
of reach of children.
• Ensure all listed parts are present.
• Required tools to assemble:
Philips head screw driver, Hammer & Wood
Glue.
• Required assembly work surface should
be solid, level, clean and flat.
• Ensure all melamine edges are facing to the
front of the unit.
Customer Services Enquiries 1800 822 823
Controlled Document 9.2.4.11
Revision 2
TP05-145

Summary

Assembly Guide Introduction

Important Pre-Assembly Instructions

Essential safety advice and preparation steps before commencing cabinet assembly.

Cabinet Construction - Main Frame

Component Identification and Initial Frame Assembly

Overview of parts and assembly of the cabinet's primary structure.

Cabinet Construction - Panel Joining

Securing Cabinet Panels and Shelving

Detailed steps for joining the main cabinet panels and installing internal components.

Door Installation and Adjustment

Hinge Adjustment Procedure

Instructions on adjusting cabinet door hinges for proper alignment and gap.

Bedford HMR Solutions Specifications

General

Brand	Bedford
Model	HMR Solutions
Category	Indoor Furnishing
Language	English