USER MANUAL – MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com P a g e | 14
With Cloud Sheet laid on bed, insert Air Nozzle into the opened elastic opening. Pull
elastic opening as far down Air Hose as it will travel. The elastic opening must be
pulled down far enough where the 2 sheet clamps on Hose Grip are inside the elastic
opening. If you can see the sheet clamps outside Cloud Sheet, the elastic opening is
not pulled down far enough and will not lock in place. See below for correct install:
Excessive bedding weight on top Cloud Sheet may cause low performance. If
Cloud Sheet does not puff up and inflate with BedJet at full air flow, then
reduce bedding load on top of Cloud Sheet.
13) If you are using your own sheets, cover the Air
Nozzle with your sheets and/or comforter. The Air
Nozzle must be covered by a sheet or comforter
in order to distribute the air throughout the bed.
Tucking in sheets around Air Nozzle can help
keep sheets in place. Or use the sheet clamps
located on Mattress Mount to hold your sheets in
place over the Air Nozzle so they are not pulled
off easily when turning over in bed. Using the
sheet clamps is highly recommended.
To Next Page
Loading...
