BedJet 3 - Page 9

USER MANUAL – MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.0 www.bedjet.com P a g e | 9
BedJet Using a Cloud Sheet
SKIP THIS PAGE IF USING YOUR OWN SHEETS
4) If installing your BedJet with the Cloud Sheet, determine the best location on your bed
to install your Mattress Mount Assembly, which will hold the Air Nozzle and Air Hose in
place. The Air Nozzle will insert into special sewn openings on the Cloud Sheet.
Locations to align with Cloud Sheet sewn openings are below:
Left side of
bed warming
and cooling
Whole bed warming
and cooling, favors
left side on low air
settings
Whole bed warming and
cooling (best location)
Right side of
bed warming
and cooling
SINGLE ZONE CLOUD SHEET WITH 1 BEDJET
Whole bed warming
and cooling, favors
right side on low air
settings
DUAL ZONE CLOUD SHEET WITH 1 OR 2 BEDJETS