15
The cotton side sleeves covering the side panels can be easily removed for washing by undoing
the hook and loop strips at the bottom and sliding off from the top. Please follow the guidance
on the care label.
We hope the bednest will become a much loved part of your family, and should you pass on
your bednest to friends and family to use after you, don’t forget that they can order new
mattresses and side panels via www.bednest.com.
Finally, we would appreciate your feedback about your experience of using your bednest, so
please do pass on your comments via www.bednest.com.
As your baby’s safety is important to us and to ensure the bednest stand remains stable, before
first use and then periodically we recommend that you conduct the following check to ensure
the stand locking mechanism is correctly set.
There is a video at the following link which will guide you.
www.bednest.com/adjust-lever-video.php
If the video is not available please refer to the instructions below.
With the stand folded flat flip up the adjustable sliding catches to their open position (unlocked).
Turn each clockwise as far as possible (they maybe stiff). Close by pushing the levers down to
clamp and lock. If after tightening you cannot fully lock the levers down, loosen off and half turn
before re-trying.
To Next Page
Loading...