Need help?Do you have a question about the Beds By George Haven Bed and is the answer not in the manual?
General| Brand | Beds By George |
|---|---|
| Model | Haven Bed |
| Category | Indoor Furnishing |
| Language | English |
Attach casters or adjustable feet to the bottom of corner posts.
Attach aluminum poles to the top of corner posts using flat head 1 1/4 bolts.
Attach wood sides to corner posts using bolts. Do not tighten until metal poles are in place.
Slide brackets onto poles, install poles, and tighten bolts. Do not tighten set screws yet.
Install top corner brackets and remaining pipes. Do not tighten set screws yet.
Attach top fabric flaps to Velcro on the top horizontal poles.
Attach bottom fabric flaps to Velcro on the horizontal poles.
Secure the canopy door by wrapping and attaching flaps, then re-zipping tautly.
Attach vertical wood shroud pieces to the corner posts using flat head bolts.
Attach the top pieces of the wood shroud using flat head bolts.
Install the mattress as the final step of bed assembly.
Install IV pole brackets onto the vertical shroud as shown.
Notes on fabric tightening and potential issues.
To Next Page