Bedslide SIDE KIX - Insert Mount Blocks into Guardrail; Remove Set Screw and Guardrail Bolt; Insert Mount Blocks; Re-attach Guardrail and End Caps

STEP 2.
INSERT (2) MOUNT BLOCKS INTO EACH GUARDRAIL
Loosen and remove the 1/4-20 x 5/8 set screw securing the plastic end cap on the ends of each
GUARDRAIL. Then loosen and remove the 1/4-20 x 3/4 button head securing the GUARDRAIL to each
of the SIDE TOWERS mounted on the BEDSLIDE. Insert (2) MOUNT BLOCKS into the open end of each
GUARDRAIL. Re-attach GUARDRAIL to the SIDE TOWERS along with the plastic end caps to each side.
A.
B.
C.
Page 1 of 3
BEDSLIDE.COM | 888.807.0099
INSERT x2
Page 1 of 3
BEDSLIDE.COM | 888.807.0099
REMOVE
Page 1 of 3
BEDSLIDE.COM | 888.807.0099
RE-INSTALL
A.
B.
C.