17
* Do not use or store this product in the following places:
Places vulnerable to vibration and impact; Places with direct sunlight; Hot
and humid places; Places with water; Strong electromagnetic field; Near
fireworks; Places accessible to children, etc,
Fault judgement and solution
1. Press and hold the power button for
more than 1.5 seconds to start up.
2. Please charge the machine and try
again.
1. Replace the adapter with a row socket
and try again
2. Please pull out the charging head and
plug it in again and confirm that it is
inserted in place
3. Please check the charging head and
charging port for dirt or sundries. If yes,
please clean up.
4. Replace the adapter or the charging
cable
1. Remove the transparent part of the cup
and re tighten it for installation
2. Check wether the air inlet and exhaust
holes are blocked
3. Check whether the filter cotton needs
to be replaced
1. Check whether the temperature
function is turned on and the
temperature prompt light is on.
2. Due to the influence of ambient
temperature, please increase the
temperature gear.
3. The battery is low, please charge it.
If the problem cannot be solved, do not disassemble the machine without permission.
Guarantee
You have a 2-year manufacturer's warranty on the Cupping Cup. You can invoke the manufacturer's
warranty if the origin of the defect does not indicate incorrect and/or rough use. To make a claim
under your warranty, please contact Bee's customer service. Indicate when contacting us where the
item was purchased and add your receipt and/or order number in the attachments.
E
info@beestech.nl
To Next Page
Loading...