INTRODUCTION
Congratulations, you have just purchased a third generation
Gammaspectacular. The GS-USB-PRO connects to any PC or Mac via
a standard USB 2.0 port and should work without any special driver
installation. It is used with free PC software such as PRA, Theremino,
Becqmoni or GeigerBot on iOS, and turns your computer into a
professional gamma spectrometer.
The GS-USB-PRO works with most common radiation detectors, such
as Geiger Mueller tubes and Scintillation detectors.
SPECIFICATIONS
Input Power : USB (+5V)
Maximum current : 200 mA
Output Bias Voltage : 0 - 2000 Volts (Variable)
HV Connector : SHV
Signal Input Connector : BNC
Analogue output option 1. : 3.5 mm Mono Jack (TS)
Analogue output option 2. : 3.5 mm Headset Jack (TRRS)
Analogue input right ch. : 3.5 mm Stereo(TRS)Crossover
Default Audio Channel : Left
Optional input : Right
Sample rate : 48 kHz
Bit rate : 16 bit
Signal to Noise Ratio : 73.9 dB
Preamp. volume (adj) : 0 - 3.3V
Pulse length (adjustable) : 5 - 100µs
Dimensions : 165 x 115 x 35 mm
Weight..............................: approx. 450 grams
STANDARD INCLUSIONS
1 x GS-USB-PRO Spectrometer
1 x 2.5 mm Screwdriver
1 x USB type A to Type B Cable
1 x 3.5 mm Mono Audio Cable
To Next Page
Loading...