Beemoo 10178697 - Care, Maintenance, and Re-assembly; General Care and Maintenance; Prepare for Fabric Cover Cleaning

EN
3
3.Release the lock of legs by pushing the buttons
on the top corners of cot upward and push the
legs inwards at the same time to start folding.
You may need to flip up the fabric that covers
the rail corners to find the buttons.
4.Turn the folded cot over and place the folded
mattress to top before store your Beemoo
Supreme Travel Cot in the carry bag.
CARE AND MAINTENANCE
IMPORTANT:
• To maintain the safety of your Beemoo Supreme Travel Cot, discontinue use if there
are bent, torn, worn or broken parts.
• Regularly inspect and maintain your product to ensure the locking devices and assem-
bly fittings are tightened correctly.
• To prolong the life of your cot, keep it clean and do not leave it in the direct sunlight for
extended periods of time.
• In some climates the fabrics and trims may be affected by mould and mildew. To help
prevent this occurring, do not fold or store the product if damp or wet. Always store the
product in a well ventilated area.
Before cleaning the fabric cover:
1.Turn your Beemoo Supreme Travel Cot upside down
2.Use your Phillips-head screw driver to loosen the screws under four plastic feet at the
bottom of wooden legs. Store the loosen screws and plastic foot carefully, you will
need them later for re-assembly.
3.Side panel of travel cot will detach from wooden leg after remove the plastic foot.
1
1
2
1 2 3