Re-assembly after cleaning:
1
2
1.Thread the metal bar into fabric pocket on the corner of fabric cover, then put them into
the slit on back of wooden leg.
2.Cap the plastic foot onto the end of wooden leg with hook side inward to hold the
wooden leg, fabric and metal bar.
3.Screw to tighten the plastic foot. Repeat the above action for all four legs.
4.Put the plastic anchor into inner side of top corner of
travel cot, close the snap button beneath. Repeat this for
all four corners.
5.Close the zippers on four sides of travel cot.
6.Smooth out the fabric portion and double check to
ensure all locking/fixing mechanism being engaged fully.
Then your Beemoo Supreme Travel Cot is ready.
2
Imported by Jollyroom AB
SÖRREDSVÄGEN 111, SE-417 29
GÖTEBORG, SWEDEN
Consumer contact: +46(0)31 310 00 00
EN
1 2 3
1
2
4
6
5
To Next Page
Loading...
