Need help?Do you have a question about the BeeSecure BEE-LOCK P1 and is the answer not in the manual?
Explains the four user administration layers and their respective authorizations.
Provides a sequential guide for initial setup and configuration of the BEE-LOCK P1.
Guides users through the process of installing batteries into the BEE-LOCK P1.
Details how to initialize the lock and set the master user passcode.
Introduces adding new users to the lock by Master/Secondary users via keypad.
Explains how Master/Secondary users can delete existing users from the lock.
Guides Master users on how to reset the lock to factory settings.
Guides users on connecting the BEE-HUB to their Wi-Fi network.
Explains establishing communication between the BEE-LOCK P1 and the BEE-HUB.
Describes remotely adding users and managing their access via the BeeSecure App.
Provides instructions for replacing batteries in emergency situations.
Details the initial steps for installing the BEE-LOCK P1 on a door.
To Next Page
General