Beetronics 7HD7M - General Settings

Beetronics User Manual | Bedienungsanleitung | Manuel d’utilisation
19 EN
General settings
General settings
01 | Language
02 | Aspect ratio
03 | No signal screen
04 | No signal mode
05 | USB autoplay
06 | Key lock
07 | Auto-on (power)
08 | Reset (default)
09 | Software-update
(USB)
-
-
-
-
-
-
-
-
-
Defines the language of the menu. The default setting is English (US).
Set the relationship between the width and height of the picture shown on the monitor.
Choose a blue or black “no signal” screen.
Select whether the monitor turns off, shows a black screen or shows NO SIGNAL when not receiving
a signal.
Select what type of USB file will be autoplayed when the monitor receives current.
Turn on/off the key lock. When turned on all buttons on the monitor are blocked. The remote is
needed to deactivate this feature.
Turn on/off the auto-on (power). When this setting is activated the monitor will turn on automatically
when it receives power.
Reset to the default/factory settings.
Update the firmware. A USB with valid firmware must be connected. A Yes/No window will be
prompted.