6
ENGLISH
Power Off: slide the power switch left, the LED indicator will turn off.
2.3. Pair and connect
Refer to the Bluetooth pairing procedures in the mobile phone or music player user manual.
When the device is on, long press the button for about 6 seconds until the blue indicator
blinks red/blue alternatively, then release the button. The product is in the pairing mode.
Search for Bluetooth devices in the phone, select the device name “BeeWi BBS305”
displayed on the phone and eventually enter the pass key “0000” to add the device to the
pair list and establish the connection.
Check the connection by placing a call or playing the music from your phone.
2.4. Connection
The speaker will automatically connect to the last connected device when it will be turned
on. If it is not the case, just connect the speaker from the mobile phone.
When using both Hands-Free and Music profiles, hands-free will always have the priority,
the music being muted in case of incoming or outgoing calls. As soon as the call has been
hung up, the music rebounds afterwards.
Note: If the mobile phone supports only Headset profile, the connection will be established
automatically when a call is made (refer to the phone user manual).
2.5. Wired mode :
When you plug the jack stereo cable included, the speaker switches to wired mode and
Bluetooth will automatically switch off. You have to launch music from your phone, tablet,
music player…
Hands-free communication function is no longer active. You will have to answer your calls
from your phone and use the phone’s microphone.
2.6. Status indicators
Status LED Descriptions
Turn On Blue Blinking 3 times
Pairing Blue & Red Blinking alternatively
Standby Mode/Connected Blue Blinking once every 5 seconds
Standby Mode/Not connected Blue Blinking twice every 3 seconds
During Communication Blue Blinking once every 5 seconds
Playing Music Blue Blinking once every 5 seconds
Low Battery Red Blinking once every 5 seconds
Charging Red Light on
Charging Completed Red Light off
To Next Page
Loading...
