BEFCO CYCLONE SUPER-FLEX series - Page 46

Increase ground speed.
Increase tractor rpm, check engine
and PTO speeds.
Ground speed too slow.
Tractor rpm too low.
Cut grass
windrows.
Allow grass to dry.
Maintain engine speed and shift to
lower gear.
Sharpen blades.
Change blades.
Move side mowers in.
Use high lift blades.
Too wet to mow.
Blades cannot cut grass
pressed down by wheels.
Dull blades.
Blades worn down, preventing
overlap.
Mowers not overlapping.
Not enough lift.
Streaking
conditions in
swath.
SOLUTIONPOSSIBLE CAUSEPROBLEM
TROUBLESHOOTING 46 BEFCO
C
YCLONE SUPER-FLEX OPERATOR’S MANUAL