EasyManua.ls Logo

Beghelli SanificaAria 30 - Technical Features

Beghelli SanificaAria 30
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
- Take out the 5 screws from the bottom of the device (the
middle screw first)
- Take out the inside part (single body) and remove the cover
- Replace the cartridge only with an original UVoxy
®
Beghelli spare part (code 26720)
- Put the cover back on, re-insert the device body into the
housing and tighten the 5 screws (the middle screw last)
SanificaAria 30 TECHNICAL FEATURES
Power supply: 230VAC ± 10%, 50÷60Hz (2m long cable)
Local switch on power cable
Power consumption: 24W
UV-C Lamp: TC 2G11 18W
UV-C wavelength: 254nm
Sanitization rate: 30m
3
/h UV-C
radiant power: 5.5W
Ozone-free UV-C lamp
Cartridge life: 12 months (continuous use). Replacing the
cartridge allows you to keep the germicidal performance
of the device in time.
Noise level: 40dB (A) at 1 meter
Weight: 3.5kg
Degree of protection: IP20
Insulation class: I (appliance with protective grounding)
Automatic safety microswitch
4