13
86076 DB-en/03 355.00032
English
⋅
LaserStar T Plus
Display and operating elements
EMERGENCY STOP button
Fig. 2 EMERGENCY STOP button on the left side
Key switch
Fig. 3 Key switch on the right side
Main switch
Fig. 4 Main switch on the rear side
Key switch LASER EIN / AUS - ON / OFF
0 Off position: the key switch should be
in this position prior to turn on the
main switch.
1 Processor boots up, software is
started.
START Lamp power supply is switched on,
laser flash lamp is ignited.
Opposite to the switch positions 0
and 1 the Start position is a
momentary position (the key switch
does not remain in this position).
To Next Page
Loading...