4
86076 DB-en/03 355.00032
English
⋅
LaserStar T Plus
Conventions
These operating instructions contain references to
residual hazards, important user tips and handling
instructions that are identified with the following
symbols and words.
This reference identifies hazards that
can cause serious bodily injury or
death if the relevant hazard instruc-
tions are not followed or not followed
properly.
This reference identifies hazards that
can cause bodily injury or property
damage if the relevant hazard
instructions are not followed or not
followed properly
This reference identifies only those
hazards that are potential
damaging to property and the
environment.
This symbol identifies user tips and particularly
useful information. It helps you optimally exploit
all the functions of your machine.
1. Sequential actions are described in sequentially
numbered paragraphs.
In most cases, the operator's actions generate
some kind of a reaction from the system. These
reactions are identified with the symbol
.
→
Cross-references are identified with the
symbol
→.
CAPITALS If cross-references refer to other chapters or
sections the header text is written with capital
letters.
(A) (B) (C) Capital letters in parentheses identify the position of
the individual elements in the associated figure.
To Next Page
Loading...
Need help?
General
