The instrument may only be touched at handle surfa-
ces provided.
The instrument may only be used within the operating
ranges as specified in the technical data section.
If the operator’s safety is no longer ensured, the in-
strument is to be put out of service and protected
against use. The safety is no longer insured, if the in-
strument:
- shows obvious damage
- does not carry out the desired measurements
- has been stored for too long under unfavourable con-
ditions
- has been subjected to mechanical stress during trans-
port.
The instrument may only be used within the operating
ranges as specified in the technical data section.
Appropriate Usage
The instrument may only be used under those condi-
tions and for those purposes for which it was manu-
factured. For this reason, in particular the safety refe-
rences (chapter 3), the technical data including
environmental conditions (chapter 7) and the usage
in dry environments must be followed.
When modifying or changing the instrument, the ope-
rational safety is no longer ensured.
19
Safety Measures
To Next Page
Loading...
