7.0 Technical Data
The following specifications are valid for ambient tempera-
tures of 23°C ±5°C at 80% relative humidity
Display LCD, 3
3
/4 digit, 3200 digit with bar-
graph
Range Resolution Tolerance
30/300mA AC 0,01/0,1mA ±(1,2% rdg. + 5 Digits)
30/300A AC 0,01/0,1A 0...200A ±(1,2% rdg. + 5 Digits)
200...250A ±(3% rdg. + 5 Digits)
250...300A ±(5% rdg. + 5 Digits)
Both measurement ranges (mA/A) can be selected
and are respectively equipped with an automatic mea-
surement range selection facility 30/300.
Overload display OL
Maximum test voltage 600V AC
Frequency range: 50…60 Hz
Mes. Rate: approx. 2 measurem./sec (digital display)
approx. 12 measurem./sec (bargraph display)
Current Converter ø approx. 32 mm
Clamp opening max. approx. 36 mm
Power Supply 2 x 1,5 V IEC LR 44 or
SR 44
Power Consumption: approx. 5 mW
Battery life duration: approx. 50 hours
(LS 44)
Auto-Power-Off: after approx. 10 min
Temperature range 0°C…+40°C at max.
80% relative humidity
Storage temperature range -10°C…+60°C at max.
70% relative humidty
Measurement circle cat. 600 V CAT II,
300 V CAT III
Pollution degree. 2
Protection category IP 30
Altitude up to 2000 m
Dimension approx. 180x65x30 mm
Weight approx. 135 g
25
Technical Data
To Next Page
Loading...
