3
SPECIFICATIONS
Mono inputs 1-12
Microphone input
Type electronically balanced,
discrete input stage
Connector XLR
Gain +10 to +60 dB (PAD = -20 dB)
Input impedance approx. 1,5k
Ω @ 1 kHz
THD + Noise 0.05 %, 20 Hz to 20 kHz, +60 dB
gain, -42 dBu at input
Max. input level +1 dBu (minimum gain)
S/N ratio 95 dB, 20 Hz to 20 kHz, gain 1,
0 dBu at input
Equivalent noise -90 dB, 20 Hz to 20 kHz, input
termination: 150 Ω
Crosstalk < -85 dB (channel 1 against chan-
nel 2), +60 dB gain, -42 dBu at input
Line input
Type electronically balanced
Connector 1/4" TRS connector
Gain -10 to +40 dB (PAD = -20 dB)
Input impedance approx. 16k Ω @ 1 kHz
THD + Noise 0.02 %, 20 Hz to 20 kHz,
+20 dB gain, -20 dBu at input
Max. input level +24 dBu (minimum gain)
S/N ratio 92 dB, 20 Hz to 20 kHz,
gain 1, 0 dBu at input
Equivalent noise -88 dB, 20 Hz to 20 kHz,
input termination: 150 Ω
Crosstalk < -90 dB (channel 1 against chan-
nel 2), gain 1, 0 dBu at input
Stereo inputs 13-16
Type electronically balanced
Connector 1/4" TRS connector
Gain -20 to +20 dB
Input impedance approx. 20k Ω @ 1 kHz
THD + Noise 0.015 %, gain 1, 0 dB at input,
measured at main out
Max. input level +22 dBu (minimum gain)
S/N ratio 86 dB, 20 Hz to 20 kHz, gain 1
(measured at main out)
Equivalent noise -85 dB, 20 Hz to 20 kHz,
(measured at main out) input termination: 150 Ω
Crosstalk < -85 dB (channel 13 against chan-
(measured at main out) nel 14), gain 1, 0 dBu at input
Main outputs
Type servo-balanced
Connector XLR
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
Multi outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
Control Room outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
S/PDIF digital input/output
Input
Connector RCA
Special feature Sample rate converter
(32 to 50 kHz)
Output
Connector RCA
Dither 16, 20 and 24 bits
Special feature Noise shaping
Wordclock input/output
Input
Connector BNC
Input impedance 20 kΩ
Output
Connector BNC
Output impedance 30 Ω
Signal type TTL level square wave
SMPTE input
Connector XLR
Input impedance 20k Ω
RS232 port
Connector 9-pin DIN jack
Transmission 115,200 bauds, 8 data bits,
1 stop bit, no parity
System specifications
Sampling rate 44.1 and 48 kHz
(internal and external)
Signal delay <1.6 ms at 48 kHz, channel input
against main out
Frequency response 20 Hz to 20 kHz, +/- 0.1 dB
Faders
Type 100-mm ALPS
®
motorized faders
Resolution +12 from 0 to -oo dB
(256 increments)
Converters
A/D converters
Resolution 24-bit delta-sigma AKM
®
Oversampling 128 times
Dynamic range 116 dB typ.
D/A converters
Resolution 24-bit delta-sigma CRYSTAL
®
Oversampling 128 times
Dynamic range 106 dB typ.
MIDI interface
Type 5-pin DIN jacks
Connectors MIDI IN, MIDI THRU and MIDI OUT
Level meters
Channel 16-digit LED display
Main 2 x 16-digit LED display
Special feature Peak-hold function
(off, 0-29 s, and oo)
Mono inputs 1-12, microphone (minimum gain)
Sig LED -46 dBu at input
Clip LED 0 dBu at input
Mono inputs 1-12, line (minimum gain)
Sig LED -25 dBu at input
Clip LED +23 dBu at input
Stereo inputs 13-16 (gain at center position)
Sig LED -36 dBu at input
Clip LED +10 dBu at input
Accessories
ADT1616 16 (2 x 8) inputs and 16 (2 x 8) output,
ADAT
®
digital interface (optical)
TDIF1616 16 (2 x 8) inputs and 16 (2 x 8) outputs,
TDIF digital interface (25-pin D-Sub)
AES808 8 inputs and 8 outputs, AES/EBU
digital interface (25-pin D-Sub)
ACB808P 19" interface box for AES808, with
4 x XLR inputs and 4 x XLR outputs
Power supply
Power consumption approx. 68 W
Fuse 100 to 240 V ~: T 4 A H
Mains connector Standard IEC receptacle
Physical
Dimensions (H * W * D) approx. 6 ½" x 17 ¼" x 22 ½"
(163 mm x 438 mm x 572 mm)
Weight (net) approx. 29 ¾" lbs (13.5 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
To Next Page
Loading...
