Behringer EUROLIGHT LD6230 - Introduction; Before Starting; The Users Manual

5
EUROLIGHT LD6230
1. INTRODUCTION
1. INTRODUCTION
As a BEHRINGER EUROLIGHT LD6230 owner, you have a high-
end dimmer pack at your hands. It was designed to answer to
the high demands of lighting professionals working in television,
theatres and live events, and is therefore universally applicable.
The EUROLIGHT LD6230 provides all necessary features for
controlling your light show, yet it is clearly laid out and easy to
use. It gives you the choice between analog and digital DMX
control. Comprehensive LEDs let you easily detect signal problems
so you can effortlessly eliminate them as soon as they occur.
+ The following users manual is intended to
familiarize you with the units control elements, so
that you can master all the functions. After having
thoroughly read the users manual, store it at a safe
place for future reference. INSTALLATION
INSTRUCTIONS supplement the users manual and
are included in the shipment.
+ A qualified professional needs to be present during
the units installation and initial operation. More
information about this topic is covered under
INSTALLATION INSTRUCTIONS.
1.1 Before you get started
1.1.1 Shipment
The LD6230 was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have occurred please inspect the
unit immediately and look for physical indications of damage.
+ Damaged units should NEVER be sent directly to us.
Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery. Otherwise,
all claims for replacement/repair may be rendered
invalid.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation,
and never place the EUROLIGHT on top of an amplifier or in the
vicinity of a heater to avoid the risk of overheating.
+ Please make sure that the unit is grounded at all
times. For your own protection, you should never
tamper with the grounding of the cable or the unit
itself.
+ To avoid damage to your equipment, always make
sure your dimmer pack is disconnected from the
mains before you connect or disconnect spotlights
or other lighting paraphernalia.
+ Make sure that only sufficiently qualified persons
install and operate your LD6230. To avoid damage or
altering of its performance through electrostatic
discharge, make sure that all people handling the
LD6230 are properly grounded both during and after
the installation.
1.1.3 Rack installation
The LD6230 requires two height units (2 HU) when installed in
a 19-inch rack. Please make sure to leave an extra 4 inches
(10 cm) of space behind the unit for wiring.
Please use M6 machine screws and nuts to install your LD6230
into a rack.
1.1.4 Warranty
Please take a few minutes and send us the completely filled
out warranty card within 14 days of the date of purchase. You
may also register online at www.behringer.com. The serial
number of your EUROLIGHT LD6230 (
) needed for registration
is located at the rear panel of the unit. Failure to register your
product may void future warranty claims.
1.2 The users manual
The users manual is designed to give you both an overview
of the controls, as well as detailed information on how to use
them. In order to help you understand the links between the
controls, we have arranged them in groups according to their
function. If you need to know more about specific issues, please
visit our website at http://www.behringer.com.