Need help?Do you have a question about the Behringer Eurolive B212 and is the answer not in the manual?
General| Impedance | 8 Ohms |
|---|---|
| Sensitivity | 95 dB (1 W @ 1 m) |
| Woofer Size | 12 inches |
| Tweeter Size | 1.35 inches |
| Crossover Frequency | 2.5 kHz |
| Connectors | 1/4" TS, SpeakON |
| Type | Passive loudspeaker |
| Power Handling | 250 Watts RMS |
| Outputs | Speakon |
| Speaker Type | 2-way |
Instructions to prevent electric shock, fire, and damage from moisture or liquids.
Covers following instructions, proper placement, and potential hearing damage.
Covers reading/keeping instructions, following warnings, and basic setup.
Guidance on mounting, using accessories, and referring servicing to qualified personnel.
Details high-power output, compact design, and driver specifications.
Covers dispersion, enclosure design, and ergonomic handles for ease of use.
Highlights speaker connectors, quality components, and rugged construction.
Covers shipment, initial operation, and online registration for the product.
Information on how to connect the EUROLIVE B212/B215 speakers.
Guidance for achieving the best sound from your EUROLIVE speakers.
Details on cables, power amp rating, and fuses for system setup.
Illustrates various ways to use the EUROLIVE B212/B215 in different setups.
Instructions for the physical installation and connection of the loudspeakers.
Technical data and dimensions for the EUROLIVE B212/B215.
Information on warranty rights, registration, and claims for the product.
Details on connecting speakers to a power amplifier and parallel inputs.
Warning about high volumes causing temporary or permanent hearing damage.
Instructions for registering equipment and obtaining warranty service.
Information on Neutrik® Speakon®-compatible inputs and pin designation.
Warning against connecting different power amp outputs to parallel inputs.
Calculation of total impedance for parallel wired speakers to prevent amplifier damage.
Indicates the location of the serial number on the unit.
Guidance on positioning HF drivers for optimal dispersion and intelligibility.
Advice on speaker placement relative to microphones to avoid feedback.
Tips for DJs to prevent bass feedback with record players.
Using a low-cut filter to prevent damage from subsonic frequencies.
Recommendations for speaker cable length and diameter to maintain performance.
Guidance on selecting a power amplifier with appropriate wattage for speakers.
Discourages fuse use; advises on signal levels, limiters, and crossovers for protection.
Example setup for stereo sound reinforcement covering the full frequency range.
Wiring diagram for connecting several B212/B215 speakers for larger rooms.
Using a crossover to split signals for stereo mains and a mono subwoofer.
Lists woofer, compression driver, frequency range, power rating, and impedance.
Provides dispersion angles and crossover frequencies for the speakers.
Details the physical dimensions (HxWxD) and weight for B212 and B215 models.
Clarifies buyer's statutory rights and applicability of warranty terms.
Explains how online registration aids in processing repair claims.
Details what is covered, what is excluded, and conditions for warranty service.
States warranty is non-transferable and limits liability for damages.
To Next Page
