GRAPHIC EQ
adjusts specific
frequencies in the
sound spectrum.
EQ button
activates the
GRAPHIC EQ.
FBQ button
activates the FBQ
detection system.
The EQ IN button
must also be
activated for this
feature to work.
MAIN LEVEL CONTROL
adjusts the overall volume of
the main mix. The MODE
switch selects stereo or mono
operation.
LINE IN jack
connects, CD players,
sub-mixers, or other
line-level source
using cables with ¼"
plugs. These jacks
accept both
balanced and
PAD function reduces the
channel input signal by 20dB.
Engage this button if the CLIP
LED lights up on a channel.
STEREO CHANNELS accept and right
sends from a single sound source using
either RCA cables or14’’ TS plugs.
To Next Page
Loading...
