Behringer EURORACK MX1804X - 7. SPECIFICATIONS

25
EURORACK MX1804X
7. SPECIFICATIONS
Mono input channels
Mic input electronically balanced, discrete input configuration
Frequency response 10 Hz to 60 kHz +/- 3 dB
Distortion (THD&N) 0.007 % at +4 dBu, 1 kHz, bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max. input +12 dBu
Mic E.I.N. (22 Hz - 22 kHz) -129.5 dBu, 150 Ohm source,
-117.3 dBqp, 150 Ohm source,
-132.0 dBu, input shorted,
-122.0 dBqp, input shorted.
Line input electronically balanced
Frequency response 10 Hz to 60 kHz +/- 3 dB
Distortion (THD&N) 0.007 % at +4 dBu, 1 kHz, bandwidth 80 kHz
Channel fader range +10 dBu to -60 dBu
Max. input +22 dBu
EQ
Low 80 Hz, +/- 15 dB
Mid 100 Hz to 8 kHz, +/- 15 dB
High 12 kHz, +/- 15 dB
Low-cut filter -3 dB at 75 Hz, 18 dB/Okt.
Stereo input channels
Line input electronically balanced
Frequency response 10 Hz to 60 kHz +/- 3 dB
Distortion (THD&N) 0.007 % at +4 dBu, 1 kHz, bandwidth 80 kHz
Channel fader range +10 dBu to -60 dBu
Max. input +22 dBu
EQ
Low 80 Hz, +/- 15 dB
Lo mid 500 Hz, +/- 15 dB
Hi mid 3 kHz, +/- 15 dB
High 12 kHz, +/- 15 dB
Main mix
Max. output +28 dBu balanced on XLR, +22 dBu unbalanced on jack
Aux send max. output +22 dBu unbalanced
Control room output +22 dBu unbalanced
Noise -112 dB (all channels open, at unity gain)
Digital effects processor
Converter 24-bit sigma-delta, 64/128-times oversampling
Sample rate 46.875 kHz
Graphik equalizer
Frequencies 60 Hz, 160 Hz, 410 Hz, 1.1 kHz, 2.3 kHz, 6.2 kHz und 15.6 kHz
Max. boost/cut +/- 10 dB
Power supply
Mains voltage U.S.A./Canada 115 V ~, 60 Hz, power supply MXUL1
U.K./Australia 240 V ~, 50 Hz, power supply MXUK1
Europe 230 V ~, 50 Hz, power supply MXEU1
Japan 100 V ~, 60 Hz, power supply MXJP1
Dimensions/weight
Dimensions (H * W * D) approx. 1.58 " / 3.54" (40/90 mm) * 16.14" (410 mm) * 15.16" (385 mm)
Weight 6.0 kg (without power supply)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
7. SPECIFICATIONS