4
SPECIFICATIONS
Input channels
Mic input electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz - 22 kHz) -129.5 dBu, 150 Ohm source
-117.3 dBqp, 150 Ohm source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted
Distortion (THD&N) 0.007% at +4 dBu, 1 kHz, Bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max input (Mic) +12 dBu
Line input electronically balanced
Sensitivity range +10 dBu to -40 dBu
Max input (Line) +22 dBu
Channel fader range +10 dB to -85 dB
Aux Send gain range off to +15 dB
Equalization
Hi shelving 12 kHz +/- 15 dB, Q fixed at 2 oct.
Mid bell 100 Hz - 8 kHz +/- 15 dB, Q fixed at 1 oct.
Lo shelving 80 Hz +/- 15 dB, Q fixed at 2 oct.
Lo Cut (High Pass) filter -3 dB at 75 Hz, 18 dB/oct.
Main Mix Section
Noise bus noise, fader 0 dB, channels muted:
-100.0 dBr (ref.: +4 dBu), fader 0 dB, all input channels assigned and
set to Unity Gain: -88.5 dBr (ref.: +4 dBu)
Max output +28 dBu balanced XLR,
+22 dBu unbalanced, 1/4" jacks
Aux Returns gain range off to Unity to +20 dB
Aux Sends max out +22 dBu
General
Distortion (THD&N) 0.007 %, at +4 dBu, 1 kHz, bandwidth 80 kHz
below 0.02 %, 22 Hz - 22 kHz normal operating levels,
any input to any output, bandwidth 80 kHz
Frequency Response 10 Hz - 120 kHz +/- 3 dB, any input to any output
Physical
Dimensions (H * W * D) app. 1 1/2" / 3 1/2" (40 / 90 mm) * 16 1/4" (410 mm) * 15 1/4" (385 mm)
Net Weight app. 5.4 kg (PSU not included)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
To Next Page
Loading...
Need help?
General
