Need help?Do you have a question about the Behringer EURORACK UB1204-PRO and is the answer not in the manual?
General| Product color | Silver |
|---|---|
| Video capability | No |
| XLR out | 2 |
| Digital sound processing | 24 bit |
| Power consumption (typical) | 40 W |
| Equalizer bands quantity | 3 |
| Microphone input impedance | 2600 Ω |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 247 mm |
| Height | 97 mm |
| Weight | 3700 g |
Details the limited warranty terms and conditions for the product.
Instructions for registering the product online to facilitate warranty claims.
Guidance on obtaining warranty service and returning the product.
Explains the three main functions of a mixing console: signal processing, distribution, and mixing.
Describes the manual's structure and how to use it for console familiarization.
Covers important steps before operating the mixer, including shipment inspection and initial setup.
Details the microphone and line inputs, EQ, and aux send controls for mono channels.
Describes the balanced XLR mic input and 1/4" line input, including phantom power.
Explains the 3-band shelving and peak EQ controls on the mono channels.
Discusses mono aux sends, their pre/post-fader options, and routing to effects or monitors.
Describes using Aux Send 1 in pre-fader mode for monitor mixes.
Details Aux Send 2 (FX) for effects, routed to the built-in processor.
Explains PAN, MUTE/ALT 3-4, MUTE LED, and CLIP LED functions.
Details the two 1/4" line inputs for stereo channels and the LEVEL switch.
Explains the stereo equalizer and its similarity to mono channel EQ.
Describes how stereo channels are summed to mono for aux sends.
Explains the BALANCE control and other routing functions for stereo channels.
Details the Aux Send 1 (MON) and Aux Send 2 (FX) connectors and their functions.
Explains the STEREO AUX RETURN 1 & 2 connectors for effects returns.
Describes the STEREO AUX RETURN 1 control for main mix level.
Guidance on using the level meter and setting recording levels for digital and analog devices.
Explains the MODE switch for PFL or Solo In Place operation.
Details the PFL function for gain setting and Solo In Place for monitoring.
Describes the 1/4" TRS connector for headphones.
Details the balanced XLR main mix outputs (+4 dBu).
Describes unbalanced Alt 3-4 and control room outputs.
Details the RCA connectors for 2-track machines and their use.
Explains the IEC mains connection, power switch, and fuse holder.
Details the +48 V phantom power supply for condenser microphones.
Introduces the built-in effects module, its presets, and routing.
Describes connecting a footswitch to control the effects processor on/off.
Explains how to adjust the effects level and select presets using the PROGRAM control.
Instructions for installing rack mount wings and mounting the console in a rack.
Details wiring for balanced/unbalanced XLR and 1/4" TS connectors.
Provides detailed specifications for microphone and line inputs.
Lists crosstalk attenuation values for faders and mute functions.
Specifies the frequency response from microphone input to main output.
Provides detailed specifications for stereo inputs.
Lists EQ frequency and gain specifications for mono and stereo channels.
Provides noise level measurements for main mix and channel faders.
Details voltage, power consumption, fuse, and mains connection.
Lists dimensions and net weight for both UB1204FX-PRO and UB1204-PRO models.
To Next Page
