Need help?Do you have a question about the Behringer Eurorack UB502 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 5 |
| Microphone Preamps | 2 |
| Inputs - Mic Preamps | 2 |
| Phantom Power | Yes |
| EQ Bands | 3 |
| EQ Bands per Channel | 3 |
| High EQ Frequency | 12 kHz |
| Mid EQ Frequency | 2.5 kHz |
| Low EQ Frequency | 80 Hz |
| Aux Sends | 1 |
| Aux Send | 1 |
| Main Outputs | 2 |
| Outputs - Other | 1 |
| Headphone Output | 1 |
| Power Supply | External |
Explains the primary functions of a mixing console: signal processing, distribution, and mixing.
Guidance on how to effectively use the user manual for console operation and understanding controls.
Preparation steps before operating the mixing console, including shipment inspection and initial setup.
Details on mono input channel controls: Mic/Line inputs, EQ, FX Send, Pan, and Level.
Instructions for connecting the mixer to the power supply unit and mains power.
Guidance on wiring audio cables for balanced and unbalanced connections.
Technical details for microphone and line inputs, including E.I.N., frequency response, and gain.
Specifications for line input impedance, gain range, and maximum input level.
Specifications for fade-out attenuation and frequency response from mic to main output.
Technical details for stereo input impedance and maximum input level.
To Next Page
