13
EURORACK UB1222FX-PRO
4. INSTALLATION
Fig. 4.1: 1/4" TS footswitch connector
4.2.1 Audio connections
Please use commercial RCA cables to wire the 2-track inputs
and outputs.
You can, of course, also connect unbalanced devices to the
balanced input/outputs. Use either mono plugs, or ensure that
ring and sleeve are bridged inside the stereo plug (or pins 1 & 3
in the case of XLR connectors).
+ Caution! You must never use unbalanced XLR
connectors (pins 1 and 3 connected) on the MIC
inputs if you intend to use the phantom power
supply.
Fig. 4.2: XLR connections
Fig. 4.3: 1/4" TS connector
Fig. 4.4: 1/4" TRS connector
Fig. 4.5: Insert send return 1/4" TRS connector
Fig. 4.6: 1/4" TRS connector for headphones
To Next Page
Loading...
