Quick Start Guide
HC 2000BNC
Wireless Active Noise-Canceling Headphones with
Bluetooth* Connectivity
Controls
(1) ANC ON/OFF button switches the ANC (Active Noise
Cancellation) circuit on and o.
(2) FORWARD/VOLUME button can be used to increase
volume (short press), skip to the next song (long
press), or begin/end a phone call on a Bluetooth-
connected mobile phone.
(3) POWER/PLAY/PAUSE button switches the
headphones on and o (long press) and begins and
pauses audio playback (short press). Secondary call
functions include Answer Call (press) and End Call/
Reject Call (long press).
(4) BACK/VOLUME button can be used to decrease
volume (short press) or skip to the previous song
(long press).
(5) MICROPHONE can be used for talkback during
phone calls.
(6) AUX IN stereo jack can be used to listen to audio from
external devices as normal wired headphones using
audio cables with 3.5 mm stereo connectors.
(7) INDICATOR LED shows the charging status
(red = charging; blue = fully charged) as well as the
Bluetooth status (blinking blue and red = in pairing
mode; blue = connected; blinking blue = audio
playback underway).
(8) MICRO USB jack is for charging rechargeable
batteries.
(3)
(4)
(2)
To Next Page
Need help?
General