Behringer Minimic Mic800 - Page 9

MINIMON MIC800 Controls
(EN) Controls
For more details on the full functionality of this product,
see the product page on behringer.com and download the
full manual.
(7)
(4)
(5)
(2)
(1)
(6)
(8) (3)
(9)
(10) (11)
(12)
(17)
(13) (14) (15) (16)
(1) (power) button: To turn the MIC800 on and o,
push this button.
(2) VTC LED: When you turn on the MIC800, this LED is illuminated.
(3) PHANTOM +48 V button.
(4) 20 dB PAD button: To reduce the input sensitivity by 20 dB,
use this button to turn on the pad.
(5) Ø (phase inversion) button: If you encounter phase
cancellation, use this button to turn on the phase
inversion feature.
(6) INPUT GAIN control: To boost the level of the input signal,
turn this control toward +26 dB (minimum setting) or,
alternatively +60 dB (maximumsetting).
(7) SIGNAL/CLIP meter: To monitor the status of the input signal,
use this meter.
(8) LOW CUT control: To lter oor rumble and other
low-frequency sounds, turn this control toward 15 Hz
(minimum ltering) or, alternatively 360 Hz
(maximum ltering).
(9) PREAMP MODELING control: To select a preamp model, turn
this control, which includes several groups of preamp models.
(10) TUBE MODELING control: To adjust the amount of tube
warmth that the MIC800 adds to the input signal, turn this
control toward COLD (minimumsetting, no warmth)
or toward HOT (maximum warmth).
(11) OUTPUT LEVEL control: To adjust the level of the output
signal, turn this control toward -∞ dB (no output signal)
or toward +10 dB (maximumlevel).
(12) VU meter: To monitor the average level of the output signal,
use this vintage style meter, which includes a dB scale.
(13) POWER connector.
(14) OUTPUT LINE connector: To output an audio signal from the
MIC800, usethis ¼" TS (unbalanced) connector.
(15) INPUT LINE connector: To input a line-level signal to the
MIC800, use this ¼" TRS (balanced) connector.
(16) INPUT MIC connector: To input a low-level signal to the
MIC800, use this XLR (balanced) connector.
(17) SERIAL NUMBER.
16 MINIMIC MIC800 17 Quick Start Guide