Need help?Do you have a question about the Behringer Miniamp AMP800 and is the answer not in the manual?
General| Frequency range | 10 - 120000 Hz |
|---|---|
| Output impedance | 100 Ω |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| Headphone connectivity | 6.3mm |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 11 W |
| Product color | Aluminum |
| LED indicators | Yes |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 242.6 mm |
| Height | 48 mm |
| Weight | 770 g |
Provides essential preliminary steps, including shipment inspection, initial operation, and online registration.
Detailed explanation of the front panel controls for input level, balance, and headphone output.
Description of rear panel connectors for power, audio inputs, and link outputs.
Illustrates unbalanced 1/4" TS and balanced 1/4" TRS patch cords for audio connectivity.
Details specifications for input, phones out, and link out connectors, including type and impedance.
Covers system frequency response, dynamic range, distortion, and amplifier output levels.
Information on power supply requirements, voltage, consumption, and physical dimensions.
Introduction to other BEHRINGER MINI products that can operate with the AMP800.
To Next Page
