Behringer Miniamp AMP800 User Manual

4 MINIAMP AMP800 User Manual
1. Introduction
Thank you very much for expressing your condence in our
products by purchasing one of our headphone amplier systems.
This 4-channel stereo headphone amplier is designed for use with
all types of headphones and therefore provides maximum exibility.
Its high-power stereo ampliers guarantee the highest sonic quality.
The ultra low-noise 4580 operational ampliers ensure outstanding
audio performance.
◊ Please read the manual carefully and keep it around for
future reference.
1.1 Before you begin
1.1.1 Shipment
Your AMP800 was carefully packed at the factory, and the
packaging was designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage that may
have occurred during transit.
◊ If the unit is damaged, please do NOT return it to BEHRINGER.
Instead, notify your dealer and the shipping company
immediately. Otherwise, claims for damage or replacement
may not be honored.
◊ Always use the original packing carton to prevent damage
during storage or transport.
◊ Make sure that no children are left unsupervised with the
AMP800 or its packaging.
◊ Please ensure proper disposal of all packing materials.
1.1.2 Initial operation
Do not put the AMP800 on any equipment that generates intense
heat, for example an amplier. Ensure that the ventilation openings
that are located on the top panel of the AMP800 are not covered
or blocked.
◊ To power the AMP800, use only the power supply unit that is
delivered with your equipment.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your
purchase by visiting http://behringer.com and read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom the
equipment was purchased. Should your BEHRINGER dealer not
be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be found
in the support area of our website (http://behringer.com).
Registering your purchase and equipment with us helps us process
your repair claims more quickly and eciently.
Thank you for your cooperation!

Behringer Miniamp AMP800 Specifications

General

Frequency range	10 - 120000 Hz
Output impedance	100 Ω
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %
Headphone connectivity	6.3mm
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	11 W
Product color	Aluminum
LED indicators	Yes

Weight and Dimensions

Depth	120 mm
Width	242.6 mm
Height	48 mm
Weight	770 g