Page 3
HOW TO
Switching off the touch command in standard MIDI mode:
Let us look at how we can edit the MIDI assignments for one specific control event, for example, the
Fader Touch event.
In case you don’t want to use this function, you can re-assign the touch command to a different MIDI
command (CC), change the MIDI channel, or just switch off the function by setting the MIDI channel to
OFF. The following steps describe how this is done based on the factory DEFAULT preset:
1. Please press the MIDI button as the OPERATION MODE
2. Now press the GLOBAL button
3. Now select by turning/pushing the DATA push encoder: 1. MIDI > 4. CHANGE CONTROL
4. The display now says “ <WAITING …> “
5. Press the FADER BANK button of the fader which you would like to modify, for example “1-8”
6. Now touch (do not move) the desired fader, for example “F1”
7. The display will indicate “FADER TOUCH 1”
8. Press the DATA knob (push encoder) to accept and go on to the next step
To Next Page
Loading...
